v8 v8
Racing Products
flatattack

5-SPEED TRANSMISSION ADAPTER

This adapter will allow a Toyota W55 or a W56 from a Corona, Crown, Cressida, Supra and Hi-Lux pickup 5-speed manual transmission to be fitted to a 1932-48 Flathead.
Two sleeves are included to accept the Ford thrust bearing and spigot bearing, with mounting bolts supplied.

TRANSMISSION ADAPTER $450.00

Select to Enlarge
Select image to enlarge

CUBE Speed Supra Short Shifter

Shifter throw is reduced by around 50%, which equals quicker shifts!

  • ISO 9001:2000 and ISO/TS 16949:2002 accredited manufacturer
  • Shorter throw and more precise
  • Two piece handle allows for fitment of CUBE ( see my store) and other aftermarket shifter levers
  • Stock shifter height and gear knob thread pattern is retained
  • Includes fitting instructions
  • Fits Supra 5 speeds W40, W50, W55, W57, W58, W59 and R154

Buy direct form CubeSpeed

$165.98 plus $13.00 shipping


Select image to enlarge

Bush kit to re-build your stock/factory Supra shifter and make it feel like new!

If the shifter bushes are worn in your factory Supra shifter you will not believe the difference!

  • ISO 9001:2000 and ISO/TS 16949:2002 accredited manufacturer
  • Includes fitting instructions
  • Very high quality construction
  • Fits Toyota Supra 5 speeds W40, W50, W55, W57, W58, W59 and R154

Buy direct form CubeSpeed

$29.95 plus $8.00 shipping


Select image to enlarge

Supra solid shifter to gearbox bush and press fit install kit

This solid bush shifter to gearbox bush replaces the factory metal and bonded rubber bush that is usually worn out/broken/or de-laminated in the Supra W55, 57 and 58 gearboxes causing the shifter to feel very loose and making it all too easy to "miss a gear"  or select the wrong gear.

Our press fit bush completely replaces your worn out factory bushing, making your shifter super precise!

Save money! 
The CUBE solution is great value for money at $39.98, compared to the poor quality factory bush which is already installed on the offsett lever and cost around $200.00.

  Save time! 
The factory bush and offsett lever requires removal and disassembly of the gearbox to install! Our bush doesn't require removal and disassembly of the gearbox and can usually carried out through the hole in the transmission tunnel.

Buy direct form CubeSpeed

$39.98 plus $8.00 shipping


Select image to enlarge

Adapter kit $115.00

This kit allows the use of the original clutch mechanism and pedal assembly to a 1932 to 1948 Ford flathead. The kit includes a NOS fork & hub with a new thrust bearing, shaft& spring


Select image to enlarge

FLAT ATTACK RACING PRODUCTS  © 2000-2015 All Rights Reserved
MIKE DAVIDSON PO Box 1348 Victor Harbor SA 5211 Australia
[P]0011 61 8 8554 7141 [M]0011 61 412 002 617 [F]0011 61 8 8554 7148 [E] mrd@dragnet.com.au